Curtain Control Module


Bluetooth Curtain Control Module

Smart Curtain Control Module that’s installed behind a standard wall plate with momentary mechanisms providing open/up, stop and close/down control of devices such as a motorised curtain or blind. It can be manually operated, controlled by KASTA remote switch devices or controlled via the KASTA app. Use the app to configure the module, including automation functions.


  • Control AC powered motors (4-wire switched motor) or DC powered motors (Class I or Class II)
  • Load (max.) 300W
  • 7 wire connection for power, motor and momentary switch mechanisms
  • Short Press on input S1 or S2 to fully Open or Close, a second Short Press to stop/pause
  • Long Press (S1, S2) >2s will initiate movement until released
  • Wireless Bluetooth Mesh communication
  • Pair with KASTA remote switch devices for wireless control (8x maximum)
  • Configured and controlled using the KASTA app (iOS and Android)
  • Supports Group, Scene, Timer and Scheduling automation functions
  • Built in overvoltage protection
  • Maximum 30 second run time (when not calibrated) to protect motor
  • Suits all Australian wall plates using a momentary mechanism
  • 3 year warranty


Residential dwellings, Apartments, Commercial, Retail, Hospitality, Accommodation, New construction, Retrofit & Renovation


Power Supply                                      220-240VAC 50Hz

Physical Connection Type                Terminals

Wiring Connections                           Active, Neutral, Motor
                 (Open/Close), Momentary

Load Output (Inductive) Max.        300W (1.2A)

Load Compatibility                             AC Motor: Standard
                   bidirectional 4-wire
                   240VAC single phase motor
                   with internal limit
                   switches (2 Active,
                   1 Neutral, 1 Earth) DC Motor:

                   Class I or Class II equipment
                   only, up to 24VDC (max.) with
                   internal limit switches

Form Factor                                          Module (puck)

Housing Material                                 Polycarbonate (PC)

Dimensions (WxDxH)                         47mm × 52mm × 22.5mm

IP Rating                                                IP20

Operating Ambient Temp.               -20 to 40℃

Standards Complied                           AS/NZS 60669.2.1
                                                                  AS/NZS 60669.1
                                                                  AS/NZS 60950.1
                                                                  AS/NZS CISPR 15
                                                                  AS/NZS 4268